The Martin Working Cowhorse saddle is highly versatile and often used in reining and cutting events as well.  Ridden by top professionals like Don Murphy, the saddle has a narrow seat for a close contact feel.  A slight rise to the front of the swells prevents you from jamming to the front of the saddle during sharp, fast turns down the fence.  The seat has a forgiving pocket, allowing you to float in a balanced position during aggressive maneuvers working a cow in competition or on the ranch.  The front of the saddle is lower to prevent interference with your hands.  Fenders are designed to swing freely, helping you establish position to move the horse forward after a cow or get back into the seat pocket during sliding stops and turns.

                                                                               Available with two horn options:

                                                                                               
                                                                          #9 Horn                            Texas Dally Horn

1.  The Texas Dally horn has a 2" cap that lets you dally when you are roping, but is small enough to hold when cutting.

2.  The #9 horn is strong enough for light roping, but better suited for training, cutting, or working a cow.

Gullet width:  6.5"
Gullet Height:  8.5"
Cantle height:  3"
Fin. Horn Height:  3.25"
Fin. Horn Cap:  TX Dally 2.25"; #9 1.875"
Seat Sizes Available: 15.5," 16" ,16.5", 17"
 

                                                                                   BACK